Music Group released the Behringer Wing and I have started to create a full tutorial series on the Behringer Wing. I look forward to bringing you instructional content on this amazing mixer! This page is on the Behringer Wing Tutorials – 100 Level Videos.
I have sorted these videos into different levels of difficulty and separated the videos into multiple sections Level 000, Level 100, Level 200, Level 300, and so on. By sorting them like this it will make the content easier for you to find in the moment!
It is my plan to have fully supported blog posts on each of these videos, but I’m going to wait for the Behringer Wing firmware to get more finalized before I do so.
Behringer Wing 100 Level Tutorial Videos
This second set of videos brings us to the starting blocks of content on the Behringer Wing Tutorial series.
Behringer Wing 101 – Inputs are Sources
Behringer Wing Video 101 – Inputs are Sources: This video is the first of the Behringer Wing 100 level tutorial videos. In this video, I explain how inputs should be thought of as sources.
Behringer Wing 102 – Naming Sources, Busses, DCAs, and Mains
Behringer Wing Video 102 – Naming Sources, Busses, DCA’s, and Mains: This video is the second of the Behringer Wing 100 level tutorial videos. In this video, I explain how to name sources, busses, DCA’s, and mains.
Behringer Wing 103 – Routing an Input Source to a Channel
Behringer Wing Video 103 – Routing an Input Source to a Channel: This video is the third of the Behringer Wing 100 level tutorial videos. In this video, I explain how to route an input source to a channel.
Behringer Wing 104 – Gain, Trim, Balance, Phantom Power
Behringer Wing Video 104 – Gain, Trim, Balance, Phantom Power: This video is the fourth of the Behringer Wing 100 level tutorial videos. In this video, I explain the preamp section of Gain, Trim, Balance, and Phantom Power.
Behringer Wing 105 – Alternate Channel Input Source
Behringer Wing Video 105 – Alternate Channel Input Source: This video is the fifth of the Behringer Wing 100 level tutorial videos. In this video, I explain the ALT or Alternate Channel Input Source.
Behringer Wing 106 – Main Buss & Main LR
Behringer Wing Video 106 – Main Buss & Main LR: This video is the sixth of the Behringer Wing 100 level tutorial videos. In this video, I explain the four stereo main busses on the Wing.
Behringer Wing 107 – Routing Outputs
Behringer Wing Video 107 – Routing Outputs: This video is the seventh of the Behringer Wing 100 level tutorial videos. In this video, I explain how to route to the outputs on the board.
Behringer Wing 108 – Setting Up a Floor Wedge Monitor
Behringer Wing Video 108 – Setting Up a Floor Wedge Monitor: This video is the eighth of the Behringer Wing 100 level tutorial videos. In this video I explain how to set up a floor monitor on the board.
Behringer Wing 109 – Setting Up a Stereo In-Ear Monitor IEM
Behringer Wing Video 109 – Setting Up a Stereo In-Ear Monitor IEM: This video is the ninth of the Behringer Wing 100 level tutorial videos. In this video, I explain how to set up an in-ear monitor feed on the board.
Behringer Wing 110 – Setting Up A Talkback Microphone
Behringer Wing Video 110 – Setting Up A Talkback Microphone: This video is the tenth of the Behringer Wing 100 level tutorial videos. In this video, I explain how to set up a talkback microphone on the Behringer Wing.
Behringer Wing 200 Level Tutorial Videos
That is the full collection of the Behringer Wing Tutorials – 100 Level Videos! In the next blog post, I will post the 200 level Behringer Wing Tutorial Videos! Keep an eye out for it!
3 Responses
Hi Drew, tnx for tutorials, I am battling to get my in ears to run smoothly when going to buses on the bottom it has button “On” must that be on at each bus of In ears? Using Bus 1-8.
Also my Daw Reaper records but I dont know how to get the playback to play back through the Wing.
Is it possible to sent a sanapsot of my Wing to Behringer so they can check my setup? Regards Wessel South Africa
Hi,
I have been watching your video on Wing for a week now. Could you please do a video on the Speaker Management FX on the wing? That would really help us to manage the loudspeakers and Subs separately. appreciate it if you could explain all the parameters of the speaker management processor with some examples.
Hi Drew,
I am following your series about the wing with great interest. I use the console in a studio, however, and would be very happy if you could also do tutorials on studio applications.
Comments are closed.